Autodesk

Πώς να επιλέξετε άδειες Autodesk για ένα αρχιτεκτονικό στούντιο

Αρχιτέκτονας που ελέγχει κατόψεις με χάρακα κλίμακας και δείγματα υλικών σε ευρωπαϊκό αρχιτεκτονικό γραφείο

Choosing Autodesk licences for architecture studios is easier when you start with project roles rather than software names. One architect may develop a BIM model, another may prepare planning drawings, a CAD technician may clean and issue DWG files, and a project leader may mainly review sheets, PDFs and coordination information. These tasks do not always require the same application.

For most architecture practices, the central decision is between a dedicated Revit licence for architects, an AutoCAD licence selection suited to drawing production, and the broader Autodesk Architecture, Engineering & Construction Collection. The best choice depends on the studio’s deliverables, the number of people creating information, and the way projects are handed to engineers, contractors and clients.

Start with the work each person must complete

List the studio’s regular tasks before comparing products. Separate authorship from review: a person who builds walls, doors, levels, views and schedules needs a different tool from someone who only checks a PDF or comments on a model.

Studio role Typical work Likely licence direction
Architect or BIM author Building models, coordinated plans, sections, elevations, sheets and schedules Revit
Design architect Developing building information while moving between concept, documentation and coordination Revit; consider the Collection if wider project tools are needed
CAD technician Precise 2D plans, details, layouts, revisions and DWG-based communication AutoCAD
BIM or project coordinator Checking model information, coordinating disciplines and preparing project exchanges Revit or the Collection, depending on the required toolset
Studio director or reviewer Reviewing design information, issued drawings and coordination outputs Use the application needed for the review and editing tasks; do not assume every reviewer needs the full suite

This role-based approach prevents two common mistakes. First, a studio may buy AutoCAD for everyone even though its main work is model-based building documentation. Second, it may assign a broad collection to people who only produce or revise 2D drawings. Both can make the licence plan less efficient.

When a Revit licence is the right fit

Revit is designed for building information modeling rather than isolated 2D drafting. Its model-based approach connects design, documentation and building data in one coordinated workflow. A change to a model element can be reflected across relevant views and documentation, reducing the manual rework associated with disconnected drawings.

A Revit licence for architects is usually the strongest fit when the studio must:

  • Create and maintain a building information model.
  • Generate coordinated floor plans, sections and elevations from that model.
  • Manage views, sheets and schedules as part of a connected documentation process.
  • Coordinate architectural information with structural or MEP teams.
  • Keep design changes aligned across several project outputs.

For example, an architect developing a multi-storey building may need to update levels, walls, openings, rooms and views while the project moves toward planning documentation or tender information. A model-based workflow can make those relationships easier to manage than a collection of independent drawings.

Revit is not automatically the best answer for every drawing task. If a person mainly edits established 2D geometry, prepares details, or works with files supplied by consultants, AutoCAD may be more appropriate. Revit also does not remove the need for coordination procedures: the team still needs naming rules, model ownership decisions, revision control and agreed exchange formats such as DWG, IFC or PDF where required by the project.

When AutoCAD is the better choice

AutoCAD is a dedicated CAD environment for accurate geometry, controlled drawing production and file-based communication. It is suitable for architects, technicians and technical teams whose daily work depends on plans, layouts, details, schematics and production drawings.

Choose AutoCAD for a role when the main requirements are:

  • Creating or revising precise 2D floor plans and technical details.
  • Working efficiently with DWG-based information from clients, engineers or contractors.
  • Preparing drawing layouts and documentation without maintaining a full BIM model.
  • Cleaning, checking or organizing geometry received from another project team.
  • Supporting legacy projects that were created as CAD drawings rather than building models.

AutoCAD can also be useful alongside Revit. A studio may use Revit for the coordinated building model while CAD specialists prepare details, adapt consultant drawings or support projects that remain 2D. This mixed environment is common, but it requires clear rules for which application is the source of each drawing and how revisions move between them.

AutoCAD is available for Windows and Mac according to the product information. Revit is a Windows product. This operating-system difference can affect purchasing decisions in a studio where some staff use Mac computers. Check the workstation and project requirements before assigning licences, especially if a user needs to work directly in Revit rather than only review exported information.

When the AEC Collection licence choice makes sense

The Autodesk Architecture, Engineering & Construction Collection is intended for architecture, engineering and construction work that needs a broader set of Autodesk tools across the building lifecycle. Its value is less about giving every person every application and more about providing a defined suite option for teams that move between design coordination, documentation and delivery.

Consider an AEC Collection licence choice when a role or project needs more than one part of the Autodesk workflow, for example:

  • A BIM author works across building design, documentation and coordination tasks.
  • The studio collaborates regularly with engineering or construction teams.
  • Several project phases require different Autodesk applications.
  • The practice wants a more consistent software environment for a wider range of building projects.
  • Buying separate products for a particular user would not cover the required workflow.

The exact products and language availability can vary by the included product. English is always available, while other languages depend on the application. Review the current product list before purchase and confirm that it contains the tools the named user actually needs. Do not choose the Collection simply because it sounds more complete; choose it when the wider toolset will be used.

Περίσταση Recommended direction Αιτία
The user mainly creates coordinated building models and sheets Revit Focused BIM workflow for design, documentation and building data
The user mainly edits 2D drawings and details AutoCAD Dedicated environment for precise CAD production
The user needs several building design and coordination tools AEC Collection Broader suite for a wider project workflow
The studio has both BIM and CAD work Role-based combination Assign Revit and AutoCAD according to the work, then use the Collection where its broader scope is justified

Plan licences for authors, CAD specialists and reviewers

Count active users by responsibility, not only by headcount. A ten-person studio may need several Revit users, a smaller number of AutoCAD users and only a limited number of Collection users. Another studio of the same size may be predominantly 2D and need the opposite balance.

For each person, answer these questions:

  1. Do they create or substantially edit a BIM model? If yes, start with Revit or the Collection.
  2. Do they produce precise 2D documentation from files? If yes, compare AutoCAD with the relevant wider suite.
  3. Do they need tools from more than one Autodesk discipline? If yes, investigate the Collection.
  4. Do they only review issued outputs? Avoid assigning a full authoring licence without checking the actual review requirement.
  5. Will they use Windows or Mac? Confirm compatibility before selecting Revit or AutoCAD.

The listed Revit, AutoCAD and AEC Collection licences are assigned to an Autodesk account. The product information specifies one device and offers one-year or three-year terms. Plan account ownership carefully: each user should be associated with the account intended to use the licence, and the studio should keep an internal record of assignments and renewal dates.

A licence is not a substitute for a project information standard. Before several people begin editing a model or exchanging drawings, define file locations, model naming, revision status, sheet numbering and who approves issued information. Software supports the workflow, but it does not decide which drawing is contractually or technically current.

Consider handover and collaboration requirements

Architecture studios rarely work in isolation. They exchange drawings and models with structural engineers, MEP consultants, quantity specialists, contractors, clients and public authorities. The right licence therefore depends partly on the information that must leave the studio.

For a BIM-led project, confirm how the team will coordinate the Revit model with other disciplines and how information will be exchanged when another party uses a different platform. IFC may be required by a client or project process, while DWG and PDF remain common for drawing-based communication. Test a representative project exchange before committing the studio to a workflow, including dimensions, layers, families or objects, sheets, schedules and revision information that matter to the project.

For a CAD-led project, agree how external DWG files are received, checked, referenced and issued. Decide whether the architect, CAD technician or project manager is responsible for the final drawing package. A strong AutoCAD licence selection will not prevent errors caused by unstructured file naming or unclear revision procedures.

For client visualisation, first identify the required output and the person producing it. Revit can provide a connected model and project views, but a studio may need additional specialist tools for advanced rendering, animation or presentation work. The AEC Collection may be relevant if its current included products cover that requirement; verify the current list rather than assuming every visualisation workflow is included.

A practical purchasing checklist

Use this checklist before ordering architecture studio software licences:

  • List each user’s main tasks: BIM authoring, 2D drafting, coordination, review or presentation.
  • Count the people who need to create or edit information, not only those who attend design meetings.
  • Separate Revit users from AutoCAD users, and identify users who need the broader Collection.
  • Check Windows and Mac requirements for every assigned user.
  • Confirm the required languages for the studio and project teams.
  • Review the current products included in the AEC Collection before purchase.
  • Check how the team will exchange DWG, IFC and PDF information with external partners.
  • Record each licence against the correct Autodesk account and device.
  • Choose a one-year or three-year term based on the studio’s planning needs.
  • Review the plan when the studio changes from 2D drafting to BIM, or when a project introduces new coordination requirements.

Genuine Autodesk licences are available from KEYFORREST with instant electronic delivery. See the current price and product details on the relevant product page, then assign the licence to the role that will use it most effectively.

Συχνές ερωτήσεις

Should every architect in a studio have a Revit licence?

No. Give Revit to people who create or substantially edit BIM information. Architects who work mainly on 2D drawings, project reviews or other tasks may need a different product, depending on their responsibilities.

Is AutoCAD still useful in a Revit-based architecture studio?

Yes. AutoCAD can support DWG-based consultant information, detailed 2D production, legacy projects and drawing tasks that do not require a full building information model.

Is the AEC Collection better than buying Revit and AutoCAD separately?

Not automatically. The Collection is appropriate when a user needs its broader building design and coordination toolset. Compare the current included products with the person’s real tasks before choosing.

Can Revit and AutoCAD be used in the same project?

Yes, but define which application is the source for each type of information and establish procedures for exchanging DWG, PDF or other required formats. Without those rules, parallel editing can create conflicting revisions.

What should a small architecture studio buy first?

Start with the project deliverables. Choose Revit for model-based building documentation, AutoCAD for primarily 2D production, and the AEC Collection where a user genuinely needs several tools across design and coordination.

author-avatar

Σχετικά με τον Marios Chaidousis

Ο Marios Chaidousis είναι ειδικός στο λογισμικό και τις άδειες χρήσης, με εξειδίκευση στα Autodesk (AutoCAD, Revit, Inventor), Microsoft (Office, Microsoft 365, Windows, Windows Server, SQL Server), Adobe και το λογισμικό ασφαλείας. Βοηθά μηχανικούς, επαγγελματίες και επιχειρήσεις να επιλέξουν τη σωστή άδεια και να αξιοποιήσουν στο έπακρο το λογισμικό τους. LinkedIn · Facebook · Instagram