Autodesk

How to Create Professional Structural Calculation Reports

Structural engineer reviewing drawings and calculation notes at an office desk

A structural calculation report must do more than display numerical results. It should explain the design situation, identify the model and assumptions, show the relevant checks and make it possible for another engineer to follow the reasoning. This matters whether the report supports an internal design review, a client submission, coordination with an architect or evidence for a construction decision.

A reliable workflow combines Autodesk Robot Structural Analysis for modelling, analysis and verification with an organised office process in Word and Excel. Robot can help engineers evaluate load paths, deflections, stability and code-check results for steel, reinforced-concrete and mixed-material structures. Word provides the main narrative report, while Excel is useful for controlled schedules, supplementary calculations and data checks.

This guide presents a practical method for producing structural design documentation. It does not replace engineering judgement, project-specific design requirements or review by a suitably qualified engineer.

Plan the structure of a calculation report

Start with the report outline before exporting results from the model. A predefined structure reduces missing information and prevents the document from becoming a collection of disconnected screenshots and tables. An engineering calculation report template should be flexible enough for different building types, but consistent enough that reviewers know where to find key information.

A useful report structure is:

  1. Document control: project name, document title, report identifier, revision, date, author, checker and approver.
  2. Purpose and scope: what the calculation covers and what it does not cover.
  3. Design basis: structural system, materials, design criteria, applicable project requirements and the relevant design approach.
  4. Geometry and modelling: grids, levels, supports, releases, member properties, slabs, walls, openings and analytical idealisations.
  5. Actions and combinations: permanent, imposed, environmental and other project-specific actions, with the combinations used for analysis and design.
  6. Analysis results: governing reactions, internal forces, displacements, modal or stability information where relevant, and selected diagrams.
  7. Member and element checks: representative or governing checks for steel, reinforced concrete and other modelled components.
  8. Design conclusions: utilisation, reinforcement or section requirements, design limitations and outstanding decisions.
  9. Appendices: detailed result tables, supplementary calculations, model information and reference drawings.

Separate the design basis from the results. A reviewer should be able to understand what was assumed before seeing whether a member passed. This distinction is especially important when several design iterations use the same model but different loads, materials or support conditions.

Define the intended report audience as well. A checking engineer may need detailed combinations and member forces. A client may need a concise explanation of the structural solution. A site or coordination team may need clear references to levels, grids, member marks and drawings. One report can serve several audiences if the main body remains readable and detailed data is placed in well-labelled appendices.

Export analysis results with assumptions and project data

A Robot calculation report should be generated from a controlled model state. Before exporting, record the model version, analysis date and design situation. If the model is revised later, the report should make clear which results belong to which revision.

In Autodesk Robot Structural Analysis, review the following before selecting report content:

  • Model identity: project, structure, levels, grids and the purpose of the model.
  • Material and section data: concrete grades, reinforcement properties, steel grades, member sections, slab properties and wall properties.
  • Boundary conditions: supports, releases, rigid links, diaphragms and other idealisations that affect force paths.
  • Actions: load cases, load definitions, directions, tributary assumptions and applied areas or members.
  • Combinations: the combinations used for global analysis and individual design checks.
  • Analysis settings: solver, linear or nonlinear assumptions, stability settings and other options relevant to interpretation.
  • Design settings: material design parameters, cover or detailing assumptions and the selected code-check configuration.

Do not export every available result by default. Excessive output makes important information harder to find and increases the chance that an outdated table remains in the report. Choose results that support a decision: for example, a reaction table for foundation coordination, a deflection diagram for serviceability, or governing utilisation for a steel beam or reinforced-concrete column.

For each result, add context in the report. State the load combination, units, element or node range, sign convention where relevant and whether the result is maximum, minimum or governing. A screenshot without a caption is difficult to review and easy to misinterpret.

Use a consistent naming system for exported files. A practical pattern includes the project code, model or result type, revision and date. Keep the source model and exported data in a controlled project location, but avoid relying on a file name alone. The report itself should contain the revision and model information needed to identify its source.

Robot helps evaluate the analytical model, but it does not confirm that the real structure has been represented correctly. The engineer must still verify connectivity, load transfer, support assumptions, construction stages where relevant and the relationship between the analytical model and drawings. A passing software check is not, by itself, proof that the design is complete.

Engineer organising structural analysis tables and revision documents

Organize checks, tables and figures in Word

Use Word as the controlled narrative layer of the report rather than pasting isolated output into an empty document. Microsoft Office Professional Plus 2024 provides a desktop workspace for professional documents and calculation-heavy workbooks, making it suitable for offices that need consistent Word and Excel workflows. Check the current product page for the supported applications and licence details before deployment.

Build the report with styles rather than manual formatting. Apply consistent heading levels, body text, captions, table text and notes. This makes the table of contents easier to maintain and allows global changes without reformatting every page.

Every figure and table should answer a clear question. Examples include:

  • Figure: Where are the supports and major load paths in the analytical model?
  • Table: Which load combinations govern the selected design checks?
  • Figure: Which storey or member has the largest calculated displacement?
  • Table: Which steel members exceed or approach the selected utilisation threshold?
  • Table: What reinforcement arrangement or section size is required by the governing check?

Use captions that identify the content and the context. “Figure 6: Vertical displacement under combination ULS-03, in millimetres” is more useful than “Robot result”. Place a short interpretation below important outputs. For example, explain whether a high reaction is expected at a transfer column, whether a deflection is relevant to a serviceability limit or whether a member has been excluded from a particular check.

Keep units visible and consistent. Do not mix millimetres and metres, or kilonewtons and newtons, without an explicit conversion. If a table is imported from Excel, check its number formatting after pasting. Rounded numbers may be acceptable for presentation, but retain sufficient precision in supporting calculations and make clear when values are rounded.

Excel is useful for supplementary calculations, schedules and controlled data preparation. Suitable uses can include a reinforcement summary, member schedule, load summary or comparison of design iterations. Protect the logic of important workbooks with clear input, calculation and output areas. Label assumptions and avoid hard-coded numbers where a formula or named input makes the relationship clearer.

Do not use Excel to conceal a discrepancy between the report and the Robot model. If a manual calculation differs from the software result, investigate the reason and document the resolution. The report should distinguish between results taken directly from Robot and independent checks prepared in Excel.

A practical content pattern for each major design item is:

  1. Design item: identify the member, panel, wall, foundation interface or structural zone.
  2. Input: describe geometry, material, restraint and relevant actions.
  3. Governing condition: identify the combination or design situation.
  4. Result: show force, displacement, utilisation, required reinforcement or other relevant output.
  5. Decision: state whether the item is acceptable, requires modification or needs further investigation.

This pattern makes the report easier to scan and helps reviewers compare similar elements. It also reduces the risk of presenting results without explaining their engineering significance.

Add revision, review and approval information

Review control is part of structural design documentation, not an administrative afterthought. A report that contains correct calculations but cannot identify its revision or checker is difficult to use safely.

Include a document control table near the beginning with fields such as:

Field Finalidade
Project and document title Identifies the structure and the specific report.
Document number Provides a stable reference for correspondence and issue records.
Revision Shows which issue is current.
Date Records when the issue was prepared or released.
Prepared, checked and approved by Defines the review stages and responsible people.
Revision description Summarises what changed and why.

Maintain a revision history even when changes appear minor. A change to a load, support, section, reinforcement assumption or design setting can affect multiple results. Record the affected chapters, drawings or model files where practical.

Use a review checklist that covers both engineering content and document quality. The checker should be able to confirm that the correct model revision was used, the assumptions match the drawings, load combinations are appropriate for the stated design basis and governing results are represented correctly.

For BIM coordination, align identifiers across the report, analytical model and drawings. Member marks, levels, grids and structural zones should be recognisable in each source. If the analytical model is simplified, explain the simplification and identify where detailed drawings or separate calculations provide additional information.

Approval information should not imply that every aspect of construction has been checked if the report covers only a defined scope. State exclusions such as temporary works, connections, foundations, existing-structure verification or construction-stage conditions when they are outside the calculation.

Quality-check the final PDF-ready document

Before issuing the report, perform a final check on both the engineering content and the exported document. A report can be technically correct in the source files but defective after conversion to PDF.

  1. Check completeness: confirm that the scope, assumptions, model description, actions, combinations, results, conclusions and appendices are present.
  2. Check consistency: compare project names, revision codes, dates, member marks, levels, units and material descriptions throughout the document.
  3. Check traceability: confirm that key tables and figures identify the model, combination, element or design situation from which they came.
  4. Check results: review governing values, unusual peaks, failed checks, warnings and any result that does not match engineering expectations.
  5. Check drawings: compare the report assumptions with the latest coordinated drawings, especially geometry, openings, supports and structural layout.
  6. Check formatting: inspect page breaks, table headings, figure captions, equation readability, bookmarks, headers, footers and the table of contents.
  7. Check the PDF: open the final exported file on a separate device or viewer and verify that text, tables, figures and symbols remain readable.

Do not hide warnings or failed checks by excluding them without explanation. If a result is outside the intended scope, document the reason. If a design issue remains unresolved, identify the action required rather than presenting an incomplete conclusion as final.

A reusable structural calculation report software workflow therefore has four controlled layers: the Robot model, exported analysis results, the Word and Excel office documents, and the final issued PDF. Each layer should have an identifiable revision and a clear relationship to the others.

Autodesk Robot Structural Analysis is available in several languages and supports professional structural analysis workflows on Windows. Microsoft Office Professional Plus 2024 provides a desktop environment for structured reports and supporting spreadsheets. Genuine licences for Autodesk and Microsoft products are available from KEYFORREST with instant electronic delivery; see the current product page for the applicable edition, licence term and device information.

Perguntas frequentes

What should a structural calculation report contain?

It should normally explain the scope, design basis, model, materials, actions, combinations, analysis assumptions, governing checks, conclusions and document-control information. Add detailed result tables or supplementary calculations where they support review.

Can Autodesk Robot Structural Analysis create the complete report?

Robot can provide model, analysis and design results, but a complete professional report also needs project scope, assumptions, interpretation, revision control and approval information. Word and Excel are useful for organising this office documentation.

Should every Robot result be included?

No. Include results that support design decisions and traceability. Excessive output can obscure governing checks. Keep detailed data in appendices when it is useful for review but not necessary in the main narrative.

Is a passing software check enough to approve a structure?

No. The engineer must verify the model, assumptions, load path, design settings, drawings and project scope. Software results support engineering judgement; they do not replace it.

How can an office keep reports consistent?

Use a controlled engineering calculation report template with fixed styles, standard sections, figure and table captions, a revision table and a review checklist. Update the template through an agreed office process rather than changing individual reports informally.

author-avatar

Sobre Marios Chaidousis

Marios Chaidousis é especialista em software e licenciamento, com experiência em Autodesk (AutoCAD, Revit, Inventor), Microsoft (Office, Microsoft 365, Windows, Windows Server, SQL Server), Adobe e software de segurança. Ajuda engenheiros, profissionais e empresas a escolher a licença certa e a tirar o máximo partido do seu software.LinkedIn · Facebook · Instagram